Product Overview
Remote control offering 16 selectable colours, adjustable brightness, speed of colour change and 4 effects (flash ,strobe, fade and smooth transition.) Designed to work in conjunction with X 3216A strip lighting.
Maximum current 6A (equates to approx. 14m of strip lighting per controller).
2.1mm DC jack power input.
Note: if strip lights up green when powering up, swap the controller to the other end of the LED strip and retest.
Operation note:
If remote is displaying incorrect colour LED's try the following process to reset it.
Once connected turn off (remove power) via controller - then press reset on remote. Lights should turn on white. Then press the speed button until all colours have been cycled through, once then start cycling through again. Stop on the first green. This indicates the correct mode, and all remote colours should change to the correct corresponding colour on the LED strip. Then press ON. If the colours are still not synced, repeat this process to load the correct code set. The unit will hold this "correct mode" even if power is removed. However if the reset button on remote is pushed then this procedure will need to be carried out again.
